Photos and notes from the bench, as the work happens. Newest first. Nothing here is a release until it lands on main.
November 13, 2026
OrcSDR + PlutoSDR in progress
A PlutoSDR clone (left, black case with a fan) connected through an attenuator, a TinySA-style analyzer, and the Tab5 running OrcSDR on 96.1 MHz FM.
OrcSDR on the M5Stack Tab5 can now take raw IQ from a PlutoSDR-compatible radio over USB, not just an RTL-SDR dongle. The stream uses my standalone driver, esp-pluto-sdr, and feeds the same IQ path the existing demodulators and screens already use.
On the bench the Pluto enumerates on the Tab5's USB-A port, the stream starts at 0.96 and 2.4 MS/s, and FM audio plays. This photo is that setup, tuned to 96.1 MHz.
This is development work in progress, receive only for now. It lives on the public OrcSDR branch claude/tab5-pluto-pin and is not in a release yet.
Raw IQ, straight to the Tab5. Pluto's in the warband now.
November 2, 2026
OrcSDR on the LilyGO T-Display-P4 in progress
The T-Display-P4 running OrcSDR on 96.1 MHz FM, with an RTL-SDR attached.Handheld, with a dipole antenna, still on 96.1 MHz FM.
I've been bringing OrcSDR up on the LilyGO T-Display-P4, a portrait ESP32-P4 board with an AMOLED screen and an onboard SX1262 LoRa radio. These photos are that board on the bench, running the Home / FM dashboard at 96.1 MHz from an RTL-SDR.
This branch also adds OrcSDR's first transmit-side feature: a LoRa TX Lab dashboard for the SX1262, with Operator, Messages and Dual Radio views. ARM and SEND stay locked until the radio path, antenna switch and a conducted TX test are verified. There is no SX1262 driver on this branch yet, and it does not transmit. If you work with LoRa, stay within your local rules.
There is no prebuilt image or web flasher for this board yet, and the Tab5 flasher on this site will not work. Build from the branch with ESP-IDF 5.5.4. First confirm the silkscreen is the AMOLED + SX1262 variant, then read the chip revision with the command below. ESP-IDF 5.5 images are for silicon below v3.0 or v3.0 and above, never both. Do not flash the default Waveshare / Hosyond console image onto the LilyGO.
Clone the branch:
git clone https://github.com/hardcoreerik/OrcSDR.git
cd OrcSDR
git switch codex/lilygo-lora-tx-ui-m5gfx-20261102
Read the chip revision (replace PORT with the board's serial port):
python -m esptool --port PORT flash_id
Export ESP-IDF 5.5.4, then build the console app with the LilyGO board overlay (add sdkconfig.silicon-v3 as the last overlay if flash_id reports a v3.x chip):
The public branch still lists the AMOLED panel backend as unfinished, so a build from this code may not put the same screen you see in the photos onto the panel. Details are in P4_BOARD_PROFILES.md.